Product Reviews

Posted 07-26-2022

Verified Purchase

By Franklin WARE

The cable fit my 2011 LR4 HSE perfectly. The only issues I had was the included bolt did not well with my pre drilled holes and ending up stripped. I found some bolts that worked and the install was completed. Looks good and easy to follow instructions. Well worth the money.

Posted 06-08-2022

Verified Purchase

By Alberto Presas

Perfect fit. Easy installation

Posted 03-17-2022

Verified Purchase

By Vern Bastable

The product fits with a bit of persistence and results in a neat looking installation. The only thing I’d change is the screws to mount the connector are very hard to screw in. I’d use self tapping metal screws over the flat tips. Be careful not to strip the Philips head if using an electric drill or even a hand driver.

Posted 03-03-2022

Verified Purchase

By Robert Delach

Great product once it's installed, and as close to OEM you can get. All connectors and wiring look and feel top notch. I provided a 4 star review only because the install instructions weren't very straight forward. That said, i have to assume that this will be the case with most aftermarket products. To start the flat 4 / 7-way plug did not mount in the orientation as shown in the photo. I had to rotate it 180 degrees so that the flat 4 wires did not pinch against the edge of the opening. Secondly the two grommets were spaced to far apart from each other. I had to unwrap the electrical tape for both ends and re-adjust to insure they fit correctly between the two openings.

Posted 10-05-2021

Verified Purchase

By David Goodermuth

Everything was exactly as it should be. Thanks

Posted 09-21-2021

Verified Purchase

By Joel Amundson

The quality of this wiring harness kit is excellent. The attention to detail with its overall assembly and the components used is of a very high quality. The sheathing and heat shrink is well placed and the added interconnects to get the assembly through the bumper area are high quality. I have been designing wiring harnesses for many years for industrial applications for John Deere and Kenworth and rocket engines at Blue Origin. This harness is better than many of the units used in heavy duty on highway and industrial applications. The one thing that didn't work well were the routing clips attached to the harness. Routing is always the most difficult part of harnessing.